If you are conjointly facing this issue “Ethernet doesn’t have a valid configuration” when run windows troubleshooter, don’t be panic. In this article, we will discuss some effective solutions to this problem. By using these solutions, you can easily solve this error, the Ethernet doesn’t have a valid IP configuration.
Before start restart, all network devices like Router, Modem, Switch, etc. and also your laptop or PC. This may fix the matter if any temporary fault causing the problem.
In order to attach to the internet, your house and your laptop or computer have to be compelled to have a valid IP address. An IP address is actually a telephone number for your laptop or computer, and there are plenty of things that would create an issue between your laptop, your router, your modem, and also the worldwide net.
When difficulty comes up, you will see an issue in your network settings- the Ethernet does not have a valid IP configuration. Generally, this can be caused by the “NIC”- the Network Interface Card. Once you fail to induce a valid IP address and therefore, a response from the web, you can get this issue.
It ought to even be noted that you simply have a native IP address – an address that solely your local network recognizes. Assume about it that the Worldwide net, or web – assigns you a street variety, however, your native network assigns you a housing number.
Numerous reasons can purpose this error, such as expired cached documents, DHCP error, incorrect configurations within the network adapter, cable problems, or even a defective network driver.
However, here are several methods for fixing this problem.
Solved: Ethernet doesn’t have a valid IP configuration in Windows 10
Method 1: Reset Winsock Protocol And / IP Settings
By resetting the Winsock protocol, as well as TCP/ IP settings, will help the customers to remove many Windows errors, which can be associated with the internet connection like DNS, or IP.
1.To get begin, press Windows + X after which choose the Command Prompt (Admin) option from the pop-up
2. In this step, perform this command to reset the Winsock protocol in your home windows
- netsh Winsock reset
After that execute the following 2 instructions to reset the IP/ TCP settings.
- netsh int TCP reset
- netsh int IP reset
After that, reboot your windows laptop or computer to use the changes. If in this case, the ethernet doesn’t have a valid IP configuration issue shown, you may use the next solution.
Method 2: Check the Network Adapter Settings
The router works to designate the IP address mechanically. This can be a default setting, although you will still opt to assign a selected IP address.
In that case, you have to be compelled to set the IP address to automatic 1st and then check the web properties for the proper settings once it’s connected. Follow these steps
- Just hold the “Windows key” and press “R”.
- Enter ncpa.cpl within the filed input and press “OK”.
3. Right-click your Network Adapter within the Network Connections window and choose” properties”.
4. From the Ethernet Properties window, choose internet protocol version 4 (TCP/IPv4) and press on
5. You will then see the web protocol version 4(TCP/IPv4) Properties window. Enable the subsequent options:
- Obtain an IP address mechanically
- Obtain DNS Server address mechanically
If getting the IP address DNS mechanically does not fix the matter, you may need to consider setting each your IP address and DNS address manually. Then follow these steps:
- First of all, open your connection properties, select “Net Protocol version 4 (TCP/IPv4)” and click on “properties”.
- Now choose to Use the subsequent IP address and use the subsequent day DNS server Fill within the information like on the screenshot below. Once you done, click OK to save changes. To visualize the necessary data such as Subnet mask and Default gateway, you will simply check affiliation properties on the other device which will connect successfully to your network.
Method 3: Check Ethernet cable and restart the router
After playacting the steps higher than, close up your router and then five minutes switch it back. Currently, check if your computer has a valid IP configuration.
If still, it doesn’t work, just connect your router to your computer using a various Ethernet cable.
Otherwise, you will get to use a unique router. If connecting to different routers won’t solve the matter, then there is a problem together with your network card.
Perform works restore to your network card, and if it doesn’t facilitate, then replace it.
Method 4: Reinstall your Network Adapter
After finishing the steps on top of, you need to uninstall and reinstall your network adapter.
- Hold the Windows key and “press R”.
- Just type hdwwiz.cpl within the input field and press “R”.
3. Right-click on your “Ethernet card” and select the Uninstall
4. When the confirmation dialog seems, just click on “Uninstall”.
5. At the last reinstall your network adapter using a driving force related to
If this reinstalling does not solve the problem, you need to reinstall the network interface card using the newest version of the driver from the manufacturer’s portal.
The Ethernet does not have a valid IP configuration. Generally, this can be caused by the “NIC”- the Network Interface Card. Once you fail to induce a valid IP address and therefore, a response from the web, you can get this issue. This problem is very serious. But by using these solutions you can easily solve the problem.